SEM 1300

	Small Size
	Universal Input Supply
	High Packing Density
	No Vents
	Cool Running
	CE Approved

DIN RAIL MOUNTED POWER SUPPLY SEM1300

INTRODUCTION
The SEM1300 is a DIN rail mounted power supply that provides a regulated 24 VDC output @ 250 ma from an AC supply ranging from 90 to 253 VAC 50/60 Hz.

Ideally suited to powering 24 V process instrumentation and signal conditioning modules, the small size of the SEM1000 series enables many more units to now be installed in a smaller space than was previously possible.

The high efficiency of the SEM1300 power supply and its very cool running operation ensures a lower ambient temperature rise and hence improved reliability.

INPUT SPECIFICATION @ 68 °F

.Supply range	.90-253 VAC
.Efficiency	.70% typical @ 230 VAC 250 ma
.Protection	.1 amp anti surge fuse must be fitted in live supply line (not supplied)
.Filter	.Built-in EMC filter
.Connections	.Captive screw connections

OUTPUT

.Voltage	.24 VDC ±0.5% @ 250 ma
.Ripple	.100 mv p-p
.Indication	.LED power on
.Isolation	.2500 V flash tested to supply
.Connections	.Captive screw connections
.Cable Size	.12 AWG Solid / 14 AWG Stranded
.Case Material	.Polyamide (Grey)
.Case Flammability	.To UL94-VO VDE 0304 Part 3 Level IIIA
.Mounting	.Top Hat rail to DIN EN 50022-35
.Ambient Operating	.32º to 158ºF .10-95% RH non-condensing .NEMA 1

APPROVALS

.Tested to:
.IEC 801-2	.Susceptibility to electrostatic discharge
.IEC 801-3	.Radiated Susceptibility
.IEC 801-4	.Susceptibility to conducted interference
.EN 55022	.Radiated emissions

DOWNLOADS
SEM1300 Instruction Manual

SEM1300 Literature

ORDER CODE

SEM1300 24 VDC @ 250 ma output