|
| | X90 Series Point Level Monitor
System
Components
The
Ronan Point Level Monitor detects the presence or absence of material at a given
point in a tank, hopper, chute or process pipe. All components are mounted
externally to the process vessel allowing the system to be used in applications
where high temperature, high pressure or corrosive and abrasive properties make
conventional level devices undesirable and more expensive to maintain.
Each point level system uses a source holder with a small radioisotope and a
detector which receives energy at a level dependant upon the presence or absence
of the process material inside the pipe or process vessel. Applications
requiring both high and low level alarms or the monitoring of several points may
utilize the same source holder in many cases.
The electronic unit converts the pulse output of the detector and provides a
DPDT (double-pole, double throw) contact output which represents the change in
status between the presence and absence of material. This electronic unit may be
mounted integrally to the detector at a remote location. Detector/electronic
packages include NEMA type 4 & 4X, NEMA type 9 and surface mount designs.
Ronan X90
Point Level Monitor Features
 | Non-Contact
Measurement
| No
Mechanical Maintenance
| Easily
and Quickly Installed
| Suitable
for Hazardous Areas
| High
Sensitivity/Quick Response
| Multipoint
Chassis Available
| Unaffected
by:
 | High
Temperature
| High
Pressure
| Abrasives/Corrosives
| Dust
or Moisture |
| | |
|
| | | | | |
|
