Mass Technologies, Inc.

P.O. Box 173187

Arlington, TX 76003-3187

 

SWAX 7000 (Sweep Type)
Home Up

 

 

 
  Downloadable Files:
 Primary Sweep  (312 Kb)
 
 
 
 
  Primary Sweep Type Sampling Machine - SWAX-7000


The Ramsey SWAX-7000 Primary Sweep Type Sampler offers an economical, simple means to procure a representative sample directly from a main stream of material. The SWAX-7000 can be used as a stand-alone sampling device to extract a cross belt cut to a sample container or as a primary first-stage cutter in a multi-stage mechanical sampling system.
   Product Detail


Ramsey's Model SWAX-7000 Sweep Type Sampling Machine offers an economical, simple means to procure a representative sample directly from a main stream of material.  Direct increments are obtained from in-motion, horizontal or inclined conveyors.

With over 500 units in service worldwide, the SWAX-7000 Sampler can be used as a stand-alone sampling device to extract a cross belt cut to a sample container, or as a primary (first stage cutter) in a multistage mechanical sampling system.  

Features and Benefits

Compact design and well-suited for low headroom installations.         
Ease of installation results in modest installation costs. Mounts directly to existing or new conveyors.  No transfer point is required.         
Rigid construction of tubular structural steel maintains positive alignment.         
Direct drive for positive stopping whether the belt is loaded or empty.         
Skirtboards on sampler prevent material spillage.         
Cost efficient.  Small primary increment means smaller, less expensive equipment in the reduction stages of system.         
Non-contact proximity switches for start-stop control.
Replaceable steel brushes and urethane wiper assure fines will be removed and included in representative sample.
Samplers counterweighted to eliminate high eccentric loading on 36" and larger belts. 
Ramsey SWAX-7000 Sweep Samplers are available for belt widths from 18" to 96" and flow rates from several tons per hour to 12,000 metric tons per hour.  
SWAX-7000 Sweep Samplers can be used as a stand-alone sampling device for size analysis or as a primary sampler in a multi-stage sampling system.  
Mechanical drive system provides years of trouble free service and is available in all motor voltages.  
Stainless Steel or Abrasion Resistant Steel housing, cutter, and chutes for long service life.
 

 

[ Home ] [ Up ]