Protect employees, your
plant and your process line with the Ramsey Pro-Line Safety Cable
Pull Switch. It is applied to the pull cable at any position,
which causes the actuating arm to rotate 20° to a tripped-locked
position when shut-off is needed. It will stay locked in the alarm
position until manually reset.
Product Detail
For
Emergency or Normal Shut-Off
A pull cable is terminated at one end from a fixed mounting and
attached at the switch end to one of the actuating arm holes. Force
applied to the pull cable at any position causes the actuating arm
to rotate 20° to a tripped-locked position. This will
stay locked until manually reset by the reset lever.
At the same time as the switch is mechanically locked out, 2
microswitches activate SPDT circuits for alarming equipment
circuits of the stop condition. Although the black arm
in the alarm condition is quite visible, accessories such as
auxiliary flags or lights can be supplied. Also
available are specially designed mounting hardware which can
eliminate welding or drilling holes in the conveyor for mounting.
Pro-Line
Safety Cable Pull Switch (299 Kb)