|
| |
 | Local Transmitter Display
Pressure, Level, Flow, Temperature, RH. etc.
| EX & NEMA 4X Housings
| Push Button Programming
(no reference signal required)
| 4 Digit LED Display
| 1/2" NPT Fittings
| Custom Linearization
| FM & ATEX Approvals Pending
| HART Transparent |
| | | | | | |
|
 |
LOOP POWERED LED INDICATOR
DM700/I Series
|
INTRODUCTION
The Model DM700/I Cap is a two wire current loop indicator
that is powered by the 4 to 20 mADC process signal it is displaying.
The face of the Cap houses a 4 digit red LED display. The back
contains the screw terminal connections and three push buttons used to
program and calibrate the unit by means of a simple menu. The menu
allows the user to select units, input/output scaling, offset, decimal
point position, and password protection. The DM700/I contains several
linearizations which can be applied to the display: square root, X3/2,
X5/2 or user defined 19 segment linearization curve.
The entire DM700/I is sealed in the cap that fits directly into SCH
series of NEMA 4X and Explosion Proof housings. Housings have
provisions for including temperature transmitters. Optional kits are
available for pipe mounting, DIN rail mount or placement of the Cap
into other style housings.
|
INTRINSIC SAFETY APPROVALS
FM and ATEX pending
GENERAL SPECIFICATIONS @ 68 °F
| .Input |
.4 to 20 mADC |
| .Range |
.-1999 to 9999
Decimal Point Selectable in any position |
| .Linearization |
.Linear,
Square Root, Power 3/2, Power 5/2, User |
| .User
Characteristic |
.Up to 19
Segments by Straight Line Interpolation |
| .Accuracy |
.± 0.01 % FS |
| .HART
Transparent Power |
.Loop Powered |
| .Loop
Drop |
.<
4.0 V @ 20 mADC |
| .Display |
.4
Digits LED |
| .Ambient |
.-4
to 167ºF |
| .IS
Approvals |
.FM
and ATEX Pending |
| .Ambient
Storage |
.-58
to 185ºF |
| .Ambient
Humidity |
.10
to 98% RH |
| .EMC
Emissions |
.BS
EN61326 |
| .EMC
Immunity |
.BS
EN61326 |
| .Connections |
.Screw
Terminals |
| .Wire
Size |
.16
AWG Maximum |
DOWNLOADS
DM700/I Instruction Manual
DM700/I Literature
ORDER CODE
DM700/ I / Housing / Approval
| .DM700
/ I Basic Model Number |
| .Housing |
.SCH4/A, B,
C or D = NEMA 4X, IP67
.SCH15 = Stainless Steel, NEMA 4X,
IP67
.SCH16 = Aluminum EX FM (3615)
.(SCH4/A - Supplied if no
housing is specified.)
|
| .Approval |
.O =
General Purpose
.X = Intrinsically Safe (FM &
ATEX Pending) |
ACCESSORIES
| ....RMK-5 |
.DIN Rail Adapter
for SCH4 Housing |
| ....RMK-7 |
.Wall Mount Bracket
for SCH4 Housing |
| ....ACC700-01 |
.Mounting Kit for
SCH16 Housing |
| ....Inquire |
.2" Pipe
Mounting Bracket |
|
