INTRODUCTION
The DM3400
is a series of highly accurate and stable
digital indicators. The DM3410
and DM3411
are for Temperature indication, and the DM3420
and DM3421
for Process.
Designed without compromise, the DM3400
series uses leading edge technology to
accept all commonly used temperature or process inputs.
Engineering units are displayed on a high efficiency Red (Green
option) LED display that provides daylight readability. The
indicators can easily be used 'stand alone' or, using the Modbus
serial communications option pod, as part of a larger system.
The display can be set to show a fixed number of
decimal places and to auto scale to show the maximum resolution.
The highly innovative case design enables option 'Pods' to be easily
installed without the need for dismantling or re-calibration. A
range of 'Plug and Play' Pods are available supply:
The flexibility of plug-in option pods combined with
the switch mode power supply results in reduced stock inventory and,
in common with the other products from Status Instruments, a low 'cost
of ownership'.
The instrument front panel is sealed to NEMA 4.
The mounting bezel of the case contains a molded-in rubber gasket.
This allows it to be sealed to the panel maintaining the NEMA 4
rating.
Tension clamp* two part connectors are provided for
'fast wiring' enabling installation to be completed in typically half
the time it would take using conventional screw terminals. These
high quality connections are manufactured to IEC-947-1 and IEC947-7
standards and maintain the contact permanently under tension to also
provide superior long-term performance in the presence of vibration.
* Alternative clamping yoke screw terminal
connectors are available by special order.
SET UP
Programming is via the front panel keys
following a logical menu structure which can be set to 'Short'
(default), whereby only the common usage features are presented to the
operator, or 'Full' where the full range of programmable features is
available. Alternatively it can be set up via a PC by using the
RS485 (Pod-3000-05) Modbus communication pod.
MENU MODE
Two front panel programming menus can be selected as follows with the
option of password protection.
| ..Feature |
..Short
Menu |
..Full
Menu |
.Temperature
Indicators
.DM3410
.DM3411 (green LED) |
.Sensor
type.
.Resolution |
.Sensor
type.
.Resolution
.ºC/ºF.
.Burnout condition.
.User offset.
.Filter time constant |
.Process
Indicators
.DM3420
.DM3421 (green LED) |
.Input
type.
.Resolution.
.Lo/Hi. |
.Input
type.
.Resolution.
.Lo/Hi.
.Burnout condition.
.Filter time constant |
.Dual
Alarm Relay
.Pod-3000/02 |
.Alarm
type.
.Setpoint. |
.Alarm
type.
.Setpoint.
.Hysterisis.
.Latch.
.Invert. |
.Isolated
Re-Transmission
.Pod-3000/03 |
.Lo/Hi. |
.Lo/Hi.
.Output Span. |
.Modbus
Comms
.Pod-3000/05 |
.Device
Number.
.Baud rate.
.Connections 2/4 |
.Device
Number.
.Baud rate.
.Connections 2/4 |
