The Ramsey DE10 is ideal
for applications in vertical flow streams where weighbelt feeders
or belt scales can't be used. A sensing plate positioned in a
material stream measures and converts the impact force into a flow
and weight measurement. The DE10 measures bulk solids flow rates
from .75 TPH to 800 TPH and can be installed in harsh
environments.
Product Detail
The
accurate measurement of process materials can save thousands of
dollars by reducing waste and improving product quality. The
DE10 is designed to provide continuous mass flow measurement in
mechanical conveying systems without interrupting the flow of
material. The DE10 is ideal for applications in vertical
flow streams where weighfeeders or conveyor scales will not fit or
cannot be applied.
Principle of Operation
The DE10 Impact Weigher measures the force generated by the
impact of flowing material on a sensing plate. This force
creates a mechanical deflection as it impacts the plate.
This deflection is measured by a sensor and converted into an
electrical signal. The signal is processed by the Micro-Tech
2106 Integrator, which displays the flow rate and total weight.
The DE10 measures bulk solids flow rates from .75 TPH to 800
TPH.
Advantages
Unique design allows installation even in the most difficult
process environments
Build-up on the sensing plate cannot influence the zero
point
An incorporated mechanical damping system absorbs shocks and
damps vibration
Sensor is located in a dust-tight enclosure external to the
process stream
Operates accurately in pulsating or surging flows
Can be installed in any conveying system except pneumatic
lines
A sensing plate is positioned in a material stream, the
impact force is measured and converted into a flow and a
weight measurement
Impact
Weighers DE10 & DE20 (201 Kb)